HP ProCurve 7102dl Reference Manual page 236

SROS Command Line Interface Reference Guide Enable Mode Command Set
show ip policy-stats <policyname>
Use the show ip policy-stats command to display a list of current policy class statistics. See ip policy-class
<policyname> on page 426 for information on configuring access policies.
Syntax Description
<policyname> Optional. Enter a specific policy class name to display information for a single policy.
Default Values
No default value necessary for this command.
Usage Examples
The following example displays a list of current policy class statistics:
ProCurve>enable
ProCurve#show ip policy-stats
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 234