HP ProCurve 7102dl Reference Manual page 315

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
Use the radius-server command to specify RADIUS servers before adding them to a group. Likewise, use
the tacacs-server command to specify TACACS+ servers before adding them to a group. These
Radius Group
commands enter a mode for adding individual servers to the named group. Refer to
Command Set TACACS+ Group Configuration Command Set
on page 1425 or on page 1427 for more
information.
The default group cannot be changed and includes all RADIUS servers in the order they were specified by
the radius-server commands. The same is true of TACACS+ servers specified by the tacacs-server
commands.
Usage Examples
The following example specifies using the line password as the first method for enable authentication and
using the enable password as the second:
ProCurve(config)#aaa authentication enable default line
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 313