HP ProCurve 7102dl Reference Manual page 83

SROS Command Line Interface Reference Guide
debug access-list <listname>
Use the debug access-list command to activate debug messages (for a specified list) associated with access
list operation. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<listname>
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug access-list command provides debug messages to aid in troubleshooting access list issues.
Usage Examples
The following example activates debug messages for the access list labeled MatchAll:
ProCurve>enable
ProCurve#debug access-list MatchAll
5991-2114
Specifies a configured access list
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
81