HP ProCurve 7102dl Reference Manual page 237

SROS Command Line Interface Reference Guide
show ip prefix-list [detail | summary] <listname>
Use the show ip prefix-list command to display BGP prefix list information.
Syntax Description
detail
summary
<listname>
Default Values
No default values are necessary for this command.
Functional Notes
If the show ip prefix-list command is issued with no arguments, a listing of the prefix-list rules but no hit
count statistics is displayed.
Usage Examples
The following example displays information about the prefix list test.
ProCurve#show ip prefix-list test
ip prefix-list test: 4 entries
seq 5 permit 0.0.0.0/0 ge 8 le 8
seq 10 deny 0.0.0.0/0 ge 9 le 9
seq 15 permit 0.0.0.0/0 ge 10 le 10
seq 20 deny 0.0.0.0/0 ge 11
5991-2114
Shows a listing of the prefix list rules and their hit counts.
Shows information about the entire prefix list.
Specifies to display information for a particular prefix list.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
235