SROS Command Line Interface Reference Guide
oam-pvc managed <frequency>
Use the oam-pvc managed command to enable end-to-end F5 Operation, Administration, and
Maintenance (OAM) loopback cell generation and OAM management for an ATM interface. Use the no
form of this command to disable generation of OAM loopback cells.
Syntax Description
>
<frequency>
Default Values
By default, the frequency is 1 second.
Usage Examples
The following example enables OAM loopback cell generation with a frequency of 5 seconds:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#oam-pvc manage 5
5991-2114
Specifies the time delay between transmitting OAM loopback cells. The range is
from 0 to 600 seconds.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
776