HP ProCurve 7102dl Reference Manual page 518

SROS Command Line Interface Reference Guide
snmp-server view <name> <value>
Use the snmp-server view command to create or modify a Simple Network Management Protocol
(SNMP) view entry. Use the no form of this command to remove an entry. Variations of this command
include:
snmp-server view <name> <value> excluded
snmp-server view <name> <value> included
Syntax Description
<viewname>
<oidtree>
excluded
included
Default Values
No default value necessary for this command.
Usage Examples
The snmp-server view command can include or exclude a group of OIDs. The following example shows
how to create a view (named blockInterfaces) to exclude the OID subtree family 1.3.3.1.2.1.2:
ProCurve(config)#snmp-server view blockInterfaces 1.3.6.1.2.1.2.* excluded
The following example shows how to create a view (named block) to include a specific OID:
ProCurve(config)#snmp-server view block 1.3.6.1.2.1.2. included
5991-2114
Specifies label for the view record being created. The name is a record reference.
Specifies the object identifier (oid) to include or exclude from the view. To identify
the subtree, specify a string using numbers, such as 1.4.2.6.8. Replace a single
subidentifier with the asterisk (*) to specify a subtree family.
Specifies an excluded view.
Specifies an included view.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
516