SROS Command Line Interface Reference Guide
Demand Interface Configuration Command Set
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Usage Examples
The following example configures the demand interface to receive LLDP packets:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#lldp receive
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
858