SROS Command Line Interface Reference Guide
frame-relay intf-type [dce | dte | nni]
Use the frame-relay intf-type command to define the Frame Relay signaling role needed for the endpoint.
Use the no form of this command to return to the default value.
Syntax Description
dce
dte
nni
Default Values
By default, frame-relay intf-type is set to dte.
Usage Examples
The following example configures the Frame Relay endpoint for DCE signaling:
ProCurve(config)#interface frame-relay 1
ProCurve(config-fr 1)#frame-relay intf-type dce
5991-2114
Specifies DCE or network signaling role. Use this interface type when you need
the unit to emulate the frame switch.
Specifies DTE or user signaling role. Use this interface type when connecting to a
Frame Relay switch (or piece of equipment emulating a frame switch).
Configures the interface to support both network and user signaling (DTE or DCE)
when necessary.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Interface Config Command Set
881