HP ProCurve 7102dl Reference Manual page 385

SROS Command Line Interface Reference Guide
ip community-list <listname>
Use the ip community-list command to create a community list for BGP route map use. Use the no form
of this command to delete a community list.
Syntax Description
<listname>
Default Values
By default, this command is disabled.
Usage Examples
The following example creates the community list and enters the community-list command mode.:
ProCurve(config)#ip community-list MyList
5991-2114
Specifies the name of the community list to use in the community list attribute for
Community List Command Set
BGP routes. See
information on the available options.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
on page 1327 for more
383