HP ProCurve 7102dl Reference Manual page 983

SROS Command Line Interface Reference Guide
backup force [backup | primary]
Use the backup force command to manually override the automatic backup feature. This can be used to
force a link into backup to allow maintenance to be performed on the primary link without disrupting data.
Use the no form of this command to return to the normal backup operation state. For more detailed on
backup functionality, refer to the Functional Notes section of the command backup call-mode <role> on
page 976.
Syntax Description
backup
primary
Default Values
By default, this feature is disabled.
Usage Examples
The following configures the SROS to force this endpoint into backup:
ProCurve(config)#interface hdlc 1
ProCurve(config-hdlc 1)#backup force backup
5991-2114
Forces backup regardless of primary link state.
Forces primary link regardless of its state.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
HDLC Command Set
981