HP ProCurve 7102dl Reference Manual page 479

SROS Command Line Interface Reference Guide
logging forwarding priority-level [error | fatal | info | notice | warning]
Use the logging forwarding priority-level command to set the threshold for events sent to the configured
syslog server specified using the logging forwarding receiver-ip command. All events with the specified
priority or higher will be sent to all configured syslog servers. See logging email priority-level [error |
fatal | info | notice | warning] on page 471 for more information. Use the no form of this command to
return to the default priority.
Syntax Description
Sets the minimum priority threshold for sending messages to the syslog server specified using the logging
forwarding receiver-ip command.
The following priorities are available (ranking from lowest to highest):
Error When selected, events with error and fatal priorities are logged.
Fatal When selected, only events with a fatal priority are logged.
Info When selected, all events are logged.
Notice When selected, events with notice, warning, error, and fatal priorities are logged.
Warning When selected, events with warning, error, and fatal priorities are logged.
Default Values
By default, the logging forwarding priority-level is set to warning.
Usage Examples
The following example sends all messages with warning level or greater to the syslog server listed using
the logging forwarding receiver-ip command.
ProCurve(config)#logging forwarding priority-level warning
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
477