HP ProCurve 7102dl Reference Manual page 149

SROS Command Line Interface Reference Guide
dir [ * ]
Use the dir command to display a directory list of all files on the system in flash memory or all files on the
system in flash memory matching the specified pattern.
Syntax Description
* Optional. When a wildcard is specified, only files located in flash memory matching the
listed pattern are displayed.
When no wildcard is specified, the entire contents of flash memory is displayed.
Default Values
No default value necessary for this command.
Usage Examples
The following is sample output from the dir command specifying a list of all .biz files:
ProCurve>enable
ProCurve#dir *.biz
4206603 J03_01.biz
4206603 SROS.biz
4039977J02_02A.biz
24208408 bytes used, 4915176 available, 29123584 total
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
147