Show Radius Statistics - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

show radius statistics

Use the show radius statistics command to display various statistics from the RADIUS subsystem. These
statistics include number of packets sent, number of invalid responses, number of timeouts, average packet
delay, and maximum packet delay. Statistics are shown for both authentication and accounting packets.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is an example output using the show radius statistics command:
ProCurve>enable
ProCurve#show radius statistics
Number of packets sent:
Number of invalid responses:
Number of timeouts:
Average delay:
Maximum delay:
5991-2114
Auth. Acct.
3 0
0 0
0 0
2 ms 0 ms
3 ms 0 ms
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
263