SROS Command Line Interface Reference Guide
Line (Telnet) Interface Config Command Set
login
Use the login command to enable security login on the line session requiring the password configured
using the password command. Use the no form of this command to disable the login feature.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set for access to the unit.
Usage Examples
The following example enables the security login feature and specifies a password on all the available
Telnet sessions (0 through 4):
ProCurve(config)#line telnet 0 4
ProCurve(config-telnet0-4)#login
ProCurve(config-telnet0-4)#password mypassword
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
557