HP ProCurve 7102dl Reference Manual page 521

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

sntp wait-time <time>

Use the sntp wait-time command to set the time between updates from the time server.

Syntax Description

Default Values

By default, the wait time is set to 86400 seconds (1 day).

Usage Examples

The following example sets the SNTP wait time to two days:

ProCurve(config)#sntp wait-time 172800

Specifies time (in seconds) between updates. The range is from 10

to 4,294,967,294.

Global Configuration Mode Command Set

Chapters

Table of Contents