HP ProCurve 7102dl Reference Manual page 33

SROS Command Line Interface Reference Guide Enable Mode Command Set
clear counters track
Use the clear counters track command to reset counters on all track objects or on a specifically named
track.
clear counters track
clear counters track <name>
Syntax Description
<name> Specifies a track object to reset counter.
Default Values
No default value necessary for this command.
Usage Examples
The following example resets the counters for all configured tracks:
ProCurve>enable
ProCurve#clear counters track
The following example resets the counters only for the track named track_1:
ProCurve>enable
ProCurve#clear counters track track_1
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 31