HP ProCurve 7102dl Reference Manual page 247

SROS Command Line Interface Reference Guide Enable Mode Command Set
show isdn-group <group id>
Use the show isdn group command to display integrated services digital network (ISDN) group
information.
Syntax Description
<group id> Displays information for a specific ISDN group. Valid range: 1 to 255.
Default Values
No default value necessary for this command.
Usage Examples
The following example displays information for ISDN group 5:
ProCurve>enable
ProCurve#show isdn-group 5
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 245