HP ProCurve 7102dl Reference Manual page 453

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Global Configuration Mode Command Set

ip subnet-zero

The ip subnet-zero command is the default operation and cannot be disabled. This command signifies the

router's ability to route to subnet-zero subnets.

Syntax Description

No subcommands.

Default Values

By default, this command is enabled.

Usage Examples

The following example subnet-zero is enabled:

ProCurve(config)#ip subnet-zero

Chapters

Table of Contents