HP ProCurve 7102dl Reference Manual page 392

SROS Command Line Interface Reference Guide
ip dhcp-server pool <name>
Use the ip dhcp-server pool command to create a DHCP address pool and enter the DHCP pool. Use the
no form of this command to remove a configured DHCP address pool. See the section DHCP Pool
Command Set on page 1406 for more information.
Syntax Description
<name>
Default Values
By default, there are no configured DHCP address pools.
Functional Notes
Use the ip dhcp-server pool to create multiple DHCP server address pools for various segments of the
network. Multiple address pools can be created to service different segments of the network with tailored
configurations.
Usage Examples
The following example creates a DHCP server address pool (labeled SALES) and enters the DHCP server
pool:
ProCurve(config)#ip dhcp-server pool SALES
ProCurve(config-dhcp)#
5991-2114
Identifies the configured DHCP server address pool by alphanumeric string (up to
32 characters in length) (example SALES).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
390