HP ProCurve 7102dl Reference Manual page 421

SROS Command Line Interface Reference Guide
ip http
Use the ip http command to enable Web access to the unit. Use the no form of these commands to disable
these features. Variations of this command include:
ip http access-class <name> in
ip http authentication <name>
ip http secure-access-class <name> in
ip http secure-server
ip http secure-server <name>
ip http server
ip http server <name>
ip http session-limit <number>
ip http session-timeout <name>
Syntax Description
access-class <name>
in
authentication <name>
secure-access-class <name> Restricts access to the HTTPS server using the specified secure access
secure-server <name>
server <name>
session-limit <number>
session-timeout <value>
Default Values
By default, this command is disabled.
Usage Examples
The following example enables web access to the router:
ProCurve(config)#ip http server
5991-2114
Restricts access to the HTTP server using the specified access control
list.
Applies to all incoming connections.
Assigns the specified AAA list to HTTP authentication.
control list.
Enables the specified SSL server.
Enables the specified HTTP server connection.
Sets the maximum number of sessions allowed. Valid range is 0 to 100
with 100 as the default.
Sets the session timeout value. Valid range is 10 to 86,400 seconds. The
default is 600.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
419