Maintenance [Reset | Restart-D] - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

maintenance [reset | restart-d]

Use the maintenance command to force a reset of the interface (initiating the SABME/UA process) or to
reset the D channel (by sending a RESTART message).
Caution The maintenance command disrupts data flow on the ISDN interface. All active calls will
drop when the reset or restart process begins.
Syntax Description
reset
restart-d
Default Values
No default necessary for this command.
Usage Examples
The following example resets the bri 1/2 interface:
ProCurve(config)#interface bri 1/2
ProCurve(config-bri 1/2)#maintenance reset
5991-2114
Forces a complete reset of the interface by initiating the SABME/UA process.
Resets the D channel by sending a Q.931 RESTART message to the Central
Office Switch.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BRI Interface Configuration Command set
588