HP ProCurve 7102dl Reference Manual page 459

SROS Command Line Interface Reference Guide
ip urlfilter exclusive-domain
Use the ip urlfilter exclusive-domain command to instruct SROS to always allow or always block a
domain without first having to verify with the URL filter server. Use the no form of this command to
remove an exclusive domain. Variations of this command include:
ip urlfilter exclusive-domain deny <name>
ip urlfilter exclusive-domain permit <name>
Syntax Description
deny <name>
permit <name>
Default Values
By default, no exclusive domains are configured.
Functional Notes
Domain matching is based on an exact match between the HTTP header and entries in the ip urlfilter
exclusive-domain command. In order to exactly match requests destined for a domain, entries should list
all possible variations of the domain that would appear in the Host field of an HTTP header. Refer to the
Usage Examples section of this command for more detailed information.
Usage Example
The following example will always allow access to www.procurve.com and procurve.com without first
having to verify the domain with the URL filter server:
ProCurve(config)#ip urlfilter exclusive-domain permit www.procurve.com
ProCurve(config)#ip urlfilter exclusive-domain permit procurve.com
The following example will always block access to www.localnews.com without first having to verify the
domain with the URL filter server:
ProCurve(config)#ip urlfilter exclusive-domain deny www.localnews.com
5991-2114
Specifies that the domain name be blocked without verifying with the URL
filter server.
Specifies that the domain name be allowed without verifying with the URL
filter server.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
457