HP ProCurve 7102dl Reference Manual page 196

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Enable Mode Command Set

ProCurve#show interfaces fr 1.100*

fr 1.100 is Active

Ip address is 63.97.45.57, mask is 255.255.255.248

Interface-dlci is 100

MTU is 1500 bytes, BW is 96000 Kbit (limited)

Average utilization is 53%

*Note: If the user has configured a Bc and Be value on the virtual circuit, the bandwidth (BW) displayed is

the sum of those values (Bc + Be). If not, the value for BW is the speed of the interface. The

Average utilization displayed is the average utilization of the displayed bandwidth. If the bandwidth

number is the Bc + Be value, the (limited) text appears (as shown above).

Chapters

Table of Contents