HP ProCurve 7102dl Reference Manual page 110

SROS Command Line Interface Reference Guide
debug ip http [verbose]
Use the debug ip http command to activate debug messages associated with HyperText Transfer Protocol
(HTTP) operation in the SROS. Debug messages are displayed (real-time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with HTTP activity:
ProCurve>enable
ProCurve#debug ip http
5991-2114
Activates detailed debug messages for HTTP operation.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
108