HP ProCurve 7102dl Reference Manual page 160

SROS Command Line Interface Reference Guide Enable Mode Command Set
show access-lists <listname>
Use the show access-lists command to display all configured access lists in the system (or a specific list).
Syntax Description
<listname> Optional. Specify a particular access list to display.
Default Values
No default value necessary for this command.
Functional Notes
The show access-lists command displays all configured access lists in the system. All entries in the
access list are displayed, and a counter indicating the number of packets matching the entry is listed.
Usage Examples
The following is a sample output from the show access-lists command:
ProCurve>enable
ProCurve#show access-lists
Standard access list MatchAll
permit host 10.3.50.6 (0 matches)
permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches)
extended access list UnTrusted
deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)
deny tcp any (0 matches)
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 158