SROS Command Line Interface Reference Guide
debug isdn events
Use the debug isdn events command to activate debug messages associated with ISDN events in the
SROS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following example activates debug messages associated with ISDN activity:
ProCurve>enable
ProCurve#debug isdn events
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
129