HP ProCurve 7102dl Reference Manual page 268

SROS Command Line Interface Reference Guide
show running-config
Use the show running-config command to display a text print of all the non-default parameters contained
in the current running configuration file. Specific portions of the running-config may be displayed, based
on the command entered. Variations of this command include the following:
show running-config
show running-config access-lists
show running-config access-lists verbose
show running-config checksum
show running-config interface <interface type> <interface id>
show running-config interface <interface type> <interface id> verbose
show running-config ip-crypto
show running-config ip-crypto verbose
show running-config ip rtp
show running-config ip rtp verbose
show running-config ip sdp
show running-config ip sdp verbose
show running-config ip sip
show running-config ip sip verbose
show running-config policy-class
show running-config policy-class verbose
show running-config probe
show running-config probe verbose
show running-config qos-map
show running-config qos-map verbose
show running-config router bgp
show running-config router bgp verbose
show running-config router ospf
show running-config router ospf verbose
show running-config router pim-sparse
show running-config router pim-sparse verbose
show running-config router rip
show running-config router rip verbose
show running-config verbose
Syntax Description
access-lists
checksum
5991-2114
Displays the current running configuration for all configured IP access lists.
Optional. Displays the encrypted Message Digest 5 (MD5) version of the
running configuration.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
266