Advertise Med Power-Via-Mdi - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Usage Information
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp

advertise med power-via-mdi

Configure the system to advertise the IEEE 802.1ab extended power via MDI TLV.
C9000 Series
Syntax
[no] advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
• ECS — Emergency call service such as defined by TIA or the national emergency
numbering association (NENA)
• ELIN — Emergency location identification number, a valid North America
Numbering Plan format telephone number supplied for ECS purposes.
— debugs LLDP.
— displays the LLDP neighbors.
• LLDP CONFIGURATION (conf-lldp)
• INTERFACE LLDP CONFIGURATION (conf-if-interface-lldp)
— displays the LLDP running configuration.
Link Layer Discovery Protocol (LLDP) 1384