System Connection; Connecting To Peripheral Devices - Delta ASDA-B3 Series User Manual

ASDA-B3

3.1 System connection

3.1.1 Connecting to peripheral devices (connecting to Delta
communication type servo motor)
Control circuit (L
Brake resistor
connector (P D C)
+
Regenerative
resistor
(optional purchase)
Power
100 W - 1.5 kW Single- / Three-phase 200 - 230V
2 kW - 3 kW Three-phase 200 - 230V
No fuse breaker (NFB)
It could prevent the instantaneous excessive current
caused by short-circuit or from damaging the servo
drive when power is on / off.
Magnetic contactor (MC)
When an alarm occurs, it outputs
ALARM signal and cuts off the power to
the servo drive.
Power input of the
main circuit (RST)
L )
1C 2C
Servo drive output (UVW)
Mini USB connector (CN4)
Connect to PC to operate the
software. Use standard type
USB mini connection cable to
connect to ASDA-Soft.
Communication port
connector (CN3/CN6)
I/O connector (CN1)
STO (CN10)
Encoder connector (CN2)
Wiring
3
3-3