Chapter 3: Installing the Branch Gateway
Branch Gateway installations
Installing the Branch Gateway consists of installing the Branch Gateway chassis, power supply,
and media modules, attaching ground conductors, and connecting the power.
Installing order for Branch Gateway
About this task
Install these devices in the following order:
Procedure
1. Branch Gateway chassis
2. Power Supply Units
3. Media modules
4. Ground conductors
5. Power to the Branch Gateway
Branch Gateway racks
The Branch Gateway mounts in a standard 19-inch rack.
You can fasten the Branch Gateway to the rack either at the front of the Branch Gateway or at the
middle. In either case, mounting brackets must be attached to the Branch Gateway.
There are two types of mounting brackets provided with the Branch Gateway:
• Without cable guides. Two mounting brackets without cable guides are provided.
• With cable guides. One mounting bracket with cable guides is provided. This bracket
provides guides for electrical cables and is useful for cable management.
October 2019
Deploying and Upgrading Avaya G450 Branch Gateway
Comments on this document? infodev@avaya.com
22