Backup Interfaces; Wan Ethernet Port Commands; Configuring Dhcp Client - Avaya G250 Administration

Backup interfaces

You can configure backup relations between a pair of any Layer 2 serial interfaces, including the
Fast Ethernet interface. For instructions on how to configure backup interfaces, see
interfaces on page 146.

WAN Ethernet port commands

Use the following commands in FastEthernet 10/2 context for basic Ethernet configuration of
the WAN Ethernet port:
Use the autoneg command to set the port speed and duplex to auto-negotiation mode for
●
the external Fast Ethernet port. Use the no form of this command to disable the
auto-negotiation mode.
Use the duplex command to control the duplex setting for the interface.
●
Use the shutdown command to set the administrative status of the current interface to
●
down. Use the no form of this command to restore the administrative status of the
interface to up.
Use the speed command to set the port speed.
●

Configuring DHCP client

This section provides information about configuring DHCP client in the G250/G350, and
contains the following topics:
DHCP client overview
●
DHCP client applications
●
DHCP client configuration
●
Releasing and renewing a DHCP lease
●
Maintaining DHCP client
●
Configuring DHCP client logging messages
●
Configuring DHCP client
Backup
Issue 1.1 June 2005 95