AAA commands
Example
AG/configure# dot1x enable
configure interface ethernet dot1x dot1x-enable
Use this command to enable or disable 802.1x on the Ethernet interface.
EAP IEEE 802.1x can be applied to Ethernet interfaces only.
Syntax
[no] dot1x-enable
Example
AG/configure/interface ethernet (6/4)/dot1x# dot1x-enable
configure interface ethernet dot1x max-req
Use this command to set the maximum of failed EAP requests sent to the supplicant. The
default is 2.
Syntax
max-req <1-10>
Example
AG/configure/interface ethernet (6/4)/dot1x# max-req 4
configure interface ethernet dot1x port-control
Use this command to configure a forced 802.1x state for a port.
Syntax
[no] port-control {auto | force-authorized | force-unauthorized}
Table 308: Variable definitions
auto
force-authorized
284
Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Enable authentication on a port.
Force a port to always be in an authorized
state.
August 2013