Espressif ESP32 Technical Reference Manual page 582

21 Two-wire Automotive Interface (TWAI)
31
0 0 0 0 0 0 0
TWAI_RX_INT_ENA Set this bit to 1 to enable receive interrupt. (R/W)
TWAI_TX_INT_ENA Set this bit to 1 to enable transmit interrupt. (R/W)
TWAI_ERR_WARN_INT_ENA Set this bit to 1 to enable error warning interrupt. (R/W)
TWAI_OVERRUN_INT_ENA Set this bit to 1 to enable data overrun interrupt. (R/W)
TWAI_ERR_PASSIVE_INT_ENA Set this bit to 1 to enable error passive interrupt. (R/W)
TWAI_ARB_LOST_INT_ENA Set this bit to 1 to enable arbitration lost interrupt. (R/W)
TWAI_BUS_ERR_INT_ENA Set this bit to 1 to enable error interrupt. (R/W)
Espressif Systems
Register 21.27. TWAI_INT ENA_REG (0x0010)
0 0 0 0 0 0 0 0
Submit Documentation Feedback
0 0 0 0 0 0 0 0
582
8 7 6 5 4 3 2 1
0 0 0 0 0 0 0 0
ESP32 TRM (Version 5.2)
0
0
Reset