Monitoring Chassis Components
Monitoring Chassis Components
Viewing Chassis Slot Information
To view basic slot information, enter the show module command at the CLI prompt:
-> show module
To view more detailed information, use the show module long command:
-> show module long
Monitoring Chassis Temperature
The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range.
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations on
page
3-25.
To check the switch's current temperature status, use the
-> show temperature
Chassis/Device | Current |
---------------+---------+---------+--------+--------+-----------------
1/CMMA
1/Slot1
2/CMMA
2/Slot1
For more information about this command, see the "Chassis Management and Monitoring Commands"
chapter in the OmniSwitch CLI Reference Guide.
page 3-44
Range
| Danger | Thresh |
54
15-93
54
15-93
39
15-85
39
15-85
show temperature
Status
93
96
UNDER THRESHOLD
93
101
UNDER THRESHOLD
85
88
UNDER THRESHOLD
85
101
UNDER THRESHOLD
OmniSwitch 6560 Hardware Users Guide
Chassis and Power Supplies
command. For example:
December 2019