step (for IPv4)
Syntax
step step-value
undo step
View
Basic IPv4 ACL view, advanced IPv4 ACL view, Ethernet frame header ACL view
Default Level
2: System level
Parameters
step-value: IPv4 ACL rule numbering step, in the range 1 to 20.
Description
Use the step command to set a rule numbering step.
Use the undo step command to restore the default.
By default, rule numbering step is five.
Examples
# Set the rule numbering step to 2 for ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
# Set the rule numbering step to 2 for ACL 3000.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] step 2
# Set the rule numbering step to 2 for ACL 4000.
<Sysname> system-view
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] step 2
IPv6 ACL Configuration Commands
acl ipv6
Syntax
acl ipv6 number acl6-number [ name acl6-name ] [ match-order { auto | config } ]
undo acl ipv6 { all | name acl6-name | number acl6-number }
View
System view
1-20