Info-Center Trapbuffer - H3C SR6600 Command Reference Manual

Default command level
2: System level
Parameters
date: Sets the timestamp format as "Mmm dd hh:mm:ss:ms yyyy", such as Dec 8 10:12:21:708 2007.
The actual format depends on the log host.
iso: Sets the ISO 8601 timestamp format. For example, 2009-09-21T15:32:55.
no-year-date: Sets the timestamp format as the current system date and time without year.
none: Indicates that no timestamp information is provided.
Examples
# Configure the timestamp format for system information sent to the log host as no-year-date.
<Sysname> system-view
[Sysname] info-center timestamp loghost no-year-date
Related commands
info-center timestamp

info-center trapbuffer

Use info-center trapbuffer to configure information output to the trap buffer.
Use undo info-center trapbuffer to disable information output to the trap buffer.
Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center trapbuffer [ channel | size ]
Default
The system outputs information to the trap buffer through channel 3 (trapbuffer), and the maximum buffer
size is 256.
Views
System view
Default command level
2: System level
Parameters
size buffersize: Specifies the maximum number of trap messages allowed in the trap buffer. The value
range is 0 to 1024, and the default is 256.
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
Usage guidelines
The info-center trapbuffer command takes effect only after the information center has been enabled with
the info-center enable command.
227