Motor Data - Danfoss VLT AutomationDrive FC 301 Programming Manual

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 1-18 Min. Current at No Load
Table 75: Parameter 1-18 Min. Current at No Load
1-18 Min. Current at No Load
Default value: 0%
Conversion index: 0
Adjust this parameter to achieve a smoother motor operation.

5.2.4 1-2* Motor Data

This parameter group contains input data from the nameplate on the connected motor.
Changing the value of these parameters affects the setting of other parameters.
The following parameters have no effect when parameter 1-10 Motor Construction is set to [1] PM, non-salient SPM, [2] PM, salient
IPM, [5] Sync. Reluctance:
-
Parameter 1-20 Motor Power [kW]
-
Parameter 1-21 Motor Power [HP]
-
Parameter 1-22 Motor Voltage
-
Parameter 1-23 Motor Frequency
Parameter 1-20 Motor Power [kW]
Table 76: Parameter 1-20 Motor Power [kW]
1-20 Motor Power [kW]
Default value: Size related
Conversion index: -2
This parameter cannot be adjusted while the motor is running.
Enter the nominal motor power in kW according to the motor nameplate data. The default value corresponds to the nominal rated
output of the drive. This parameter is visible in the LCP if parameter 0-03 Regional Settings is set to [0] International.
Parameter 1-21 Motor Power [HP]
Table 77: Parameter 1-21 Motor Power [HP]
1-21 Motor Power [HP]
Default value: Size related
Conversion index: -2
Enter the nominal motor power in hp according to the motor nameplate data. The default value corresponds to the nominal rated
output of the drive. This parameter is visible in the LCP if parameter 0-03 Regional Settings is set to [1] North America.
Danfoss A/S © 2022.12
Parameter type: Range, 0 - 50%
Data type: Uint16
N O T I C E
N O T I C E
Parameter type: Range, 0.09 - 3000.00 kW
Data type: Uint32
N O T I C E
Parameter type: Range, 0.09 - 3000.00 hp
Data type: Uint32
Parameter Descriptions
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
AU275636650261en-000101 / 130R0334 | 75