Danfoss VLT AutomationDrive FC 301 Programming Manual page 579

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 30-10 Wobble Ratio
Table 1073: Parameter 30-10 Wobble Ratio
30-10 Wobble Ratio
Default value: 1
Conversion index: -1
If the ratio 0.1 is selected: t
down
Center frequency
Use parameter group 3-1* References to set the center frequency.
Parameter 30-11 Wobble Random Ratio Max.
Table 1074: Parameter 30-11 Wobble Random Ratio Max.
30-11 Wobble Random Ratio Max.
Default value: 10
Conversion index: -1
Enter the maximum allowed wobble ratio.
Parameter 30-12 Wobble Random Ratio Min.
Table 1075: Parameter 30-12 Wobble Random Ratio Min.
30-12 Wobble Random Ratio Min.
Default value: 0.1
Conversion index: -1
Enter the minimum allowed wobble ratio.
Parameter 30-19 Wobble Delta Freq. Scaled
Table 1076: Parameter 30-19 Wobble Delta Freq. Scaled
30-19 Wobble Delta Freq. Scaled
Default value: 0 Hz
Conversion index: -1
Readout parameter. View the actual wobble delta frequency after scaling has been applied.
5.23.2 30-2* Adv. Start Adjust
This parameter group is only available in FC 302.
Parameter 30-20 High Starting Torque Time [s]
Table 1077: Parameter 30-20 High Starting Torque Time [s]
30-20 High Starting Torque Time [s]
Default value: Size related
Conversion index: -2
Define for how long the increased high starting torque current defined in parameter 30-21 High Starting Torque Current should be
applied.
Danfoss A/S © 2022.12
Parameter type: Range, 0.1 - 10
Data type: Uint8
is 10 times greater than t . If the ratio 10 is selected: t
up
Parameter type: Range, par. 17-53 - 10
Data type: Uint8
Parameter type: Range, 0.1 - par. 30-11
Data type: Uint8
Parameter type: Range, 0 - 1000 Hz
Data type: Uint16
N O T I C E
Parameter type: Range, 0 - 60 s
Data type: Uint16
Parameter Descriptions
Setup: All setups
Change during operation: True
is 10 times greater than t
up down
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 579
.