Danfoss VLT AutomationDrive FC 301 Programming Manual page 52

VLT AutomationDrive FC 301/302
Programming Guide
Option
[125]
[126]
[127]
[130]
[131]
[132]
[140]
[141]
[145]
[160]
[170]
[171]
[172]
[173]
[176]
[177]
[178]
[180]
Parameter 0-31 Min Value of User-defined Readout
Table 22: Parameter 0-31 Min Value of User-defined Readout
0-31 Min Value of User-defined Readout
Default value: 0 CustomReadoutUnit
Conversion index: -2
This parameter sets the minimum value of the custom-defined readout (occurs at 0 speed). Only possible to set different from 0
when selecting a linear unit in parameter 0-30 Unit for User-defined Readout. For quadratic and cubic units, the minimum value is 0.
Parameter 0-32 Max Value of User-defined Readout
Table 23: Parameter 0-32 Max Value of User-defined Readout
0-32 Max Value of User-defined Readout
Default value: 100 CustomReadoutUnit
Conversion index: -2
This parameter sets the maximum value to be shown when the speed of the motor has reached the set value for parameter 4-13
Motor Speed High Limit [RPM] or parameter 4-14 Motor Speed High Limit [Hz] (depends on setting in parameter 0-02 Motor Speed Unit).
52 | Danfoss A/S © 2022.12
Name
3
ft /s
3
ft /min
3
ft /h
lb/s
lb/min
lb/h
ft/s
ft/min
ft
°F
psi
2
lb/in
in WG
ft WG
kpsi
MPa
kBar
hp
Parameter type: Range, -999999.99 CustomReadoutUnit
- par. 0-32
Data type: Int32
Parameter type: Range, par. 0-31 -999999.99 Custom-
ReadoutUnit
Data type: Int32
Parameter Descriptions
Description
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334