Danfoss VLT AutomationDrive FC 301 Programming Manual page 261

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[4] Frequency input 33
[7] Analog input X30/11
[8] Analog input X30/12
[15] Analog input X48/2
[16] Analog input X49/1
[17] Analog input X49/3
[18] Analog input X49/5
Parameter 7-22 Process CL Feedback 2 Resource
Table 461: Parameter 7-22 Process CL Feedback 2 Resource
7-22 Process CL Feedback 2 Resource
Default value: [0] No function
Conversion index: –
The effective feedback signal is made up of the sum of up to 2 different input signals. Select which drive input should be treated as
nd
the source of the 2 of these signals. The 1
Option Name
[0]* No function
[1] Analog input 53
[2] Analog input 54
[3] Frequency input 29
[4] Frequency input 33
[7] Analog input X30/11
[8] Analog input X30/12
[15] Analog input X48/2
[16] Analog input X49/1
[17] Analog input X49/3
[18] Analog input X49/5
Danfoss A/S © 2022.12
Description
Parameter type: Option
Data type: Uint8
st
input signal is defined in parameter 7-20 Process CL Feedback 1 Resource.
Description
This option is only available in FC 302.
Parameter Descriptions
Setup: All setups
Change during operation: True
N O T I C E
AU275636650261en-000101 / 130R0334 | 261