Danfoss VLT AutomationDrive FC 301 Programming Manual page 278

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[79] Logic rule 9
[80] SL digital out A
[81] SL digital out B
[82] SL digital out C
[83] SL digital out D
[84] SL digital out E
[85] SL digital out F
[86] ATEX ETR cur. alarm
[87] ATEX ETR freq. alarm
[88] ATEX ETR cur. warning
[89] ATEX ETR freq. warning
[90] Safe function active
[91] Safe opt. reset. req.
[92] IGBT-cooling
[96] Reverse after ramp
[181] Prev. maintenance
[196] Emcy mode is active
[197] Emcy mode was active
[198] Emcy mode limits
[200] User defined alerts
[210] Pos. set acknowledge
[231] In power lim. mot.
278 | Danfoss A/S © 2022.12
Description
This option is available only with software version 48.XX.
Indicates if the direction of rotation should be reversed. Depends on whether the speed
reference is positive or negative after the ramp specified in parameter 16-48 Speed Ref.
After Ramp [RPM].
The drive is operating in emergency mode. See parameter group 24-0* Emergency Mode.
The drive has been operating in emergency mode.
During emergency mode operation, 1 of the critical alarms has been activated and sup-
pressed by emergency mode. This may lead to reduced drive performance and expec-
ted operation lifetime before service is required.
This parameter is only available with software version 48.9X.
Acknowledge activation of the set target position.
This option is only available in FC 302.
See parameter group 4-8* Power Limit. Use this option in motor mode only.
N O T I C E
N O T I C E
N O T I C E
AU275636650261en-000101 / 130R0334
Parameter Descriptions