Danfoss VLT AutomationDrive FC 301 Programming Manual page 376

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[84] Digital input X46/11
[85] Digital input X46/13
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
[100] RS Flipflop 6
[101] RS Flipflop 7
[212] Emergency mode
[222] Homing OK
[223] On target
[224] Position error
[225] Position limit
[226] Touch on target
[227] Touch activated.
[228] Comparator 6
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[238] RS flipflop 8
[239] RS flipflop 9
Parameter 13-02 Stop Event
Table 672: Parameter 13-02 Stop Event
13-02 Stop Event
Default value: Size related
Conversion index: -
376 | Danfoss A/S © 2022.12
Description
Use the value of X46/11 (VLT® Extended Relay Card MCB 113).
Use the value of X46/13 (VLT® Extended Relay Card MCB 113).
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Use the result of comparator 6.
Use the result of comparator 7.
Use the result of comparator 8.
Use the result of comparator 9.
Use the result of logic rule 6.
Use the result of logic rule 7.
Use the result of logic rule 8.
Use the result of logic rule 9.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Parameter type: Option, Array [4]
Data type: Uint8
Parameter Descriptions
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334