Danfoss VLT AutomationDrive FC 301 Programming Manual page 621

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 33-81 Power-up State
Table 1227: Parameter 33-81 Power-up State
33-81 Power-up State
Default value: [1] Motor on
Conversion index: -
Option
[0]
[1]*
Parameter 33-82 Drive Status Monitoring
Table 1228: Parameter 33-82 Drive Status Monitoring
33-82 Drive Status Monitoring
Default value: [1] On
Conversion index: -
Option
[0]
[1]*
Parameter 33-83 Behavior afterError
Table 1229: Parameter 33-83 Behavior afterError
33-83 Behavior afterError
Default value: [0] Coast
Conversion index: -
Option
[0]*
[1]
[2]
[3]
[5]
Parameter 33-84 Behavior afterEsc.
Table 1230: Parameter 33-84 Behavior afterEsc.
33-84 Behavior afterEsc.
Default value: [0] Controlled stop
Conversion index: -
Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
Name
Motor off
Motor on
Parameter type: Option
Data type: Uint8
Name
Off
On
Parameter type: Option
Data type: Uint8
Name
Coast
Coast and brake
Controlled stop
Contr.stop + brake
Only errorhandler
Parameter type: Option
Data type: Uint8
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 621
Parameter Descriptions