Danfoss VLT AutomationDrive FC 301 Programming Manual page 273

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[6] Qstop and trip
[7] Select setup 1
[8] Select setup 2
[9] Select setup 3
[10] Select setup 4
[26] Trip
Parameter 8-05 End-of-Timeout Function
Table 499: Parameter 8-05 End-of-Timeout Function
8-05 End-of-Timeout Function
Default value: [1] Resume set-up
Conversion index: –
Select the action after receiving a valid control word following a timeout. This parameter is active only when parameter 8-04 Control
Word Timeout Function is set to:
• [7] Setup 1
•
[8] Setup 2
•
[9] Setup 3
• [10] Setup 4
Option Name Description
[0] Hold set-up
Retains the setup selected in parameter 8-04 Control Word Timeout Function and shows a warning until
parameter 8-06 Reset Control Word Timeout toggles. Then the drive resumes its original setup.
[1]* Resume setup Resumes the setup that was active before the timeout.
Parameter 8-06 Reset Control Word Timeout
Table 500: Parameter 8-06 Reset Control Word Timeout
8-06 Reset Control Word Timeout
Default value: [0] Do not reset
Conversion index: –
This parameter is active only when [0] Hold set-up has been selected in parameter 8-05 End-of-Timeout Function.
Danfoss A/S © 2022.12
Description
• Via the fieldbus.
• Via [Reset].
• Via a digital input.
This option is only available with software version 48.XX.
Stops the motor with the quick stop ramp (parameter 3-81 Quick Stop Ramp Time). Perform a reset to
restart the drive.
Changes the setup after a control word timeout. If communication resumes after a timeout, parameter
8-05 End-of-Timeout Function either resumes the setup used before the timeout, or retains the setup
endorsed by the timeout function.
See [7] Select set-up 1.
See [7] Select set-up 1.
See [7] Select set-up 1.
Parameter type: Option
Data type: Uint8
Parameter type: Option
Data type: Uint8
N O T I C E
Setup: 1 setup
Change during operation: True
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 273
Parameter Descriptions