Danfoss VLT AutomationDrive FC 301 Programming Manual page 677

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 42-85 Active Safe Func.
Table 1407: Parameter 42-85 Active Safe Func.
42-85 Active Safe Func.
Default value: [10] None
Conversion index: -
Option
[0]
[1]
[2]
[3]
[4]
[8]
[10]*
Parameter 42-86 Safe Option Info
Table 1408: Parameter 42-86 Safe Option Info
42-86 Safe Option Info
Default value: 0
Conversion index: 0
Shows information about the safety option. Can be used on the LCP.
Parameter 42-89 Customization File Version
Table 1409: Parameter 42-89 Customization File Version
42-89 Customization File Version
Default value: Size related
Conversion index: 0
Stores the customization file version.
5.32 Parameter Group 43-** Unit Readouts
The parameters in this group provide readouts for monitoring the operation of drives in enclosure sizes D–F.
5.32.1 43-0* Component Status
The following parameters are only available in FC 302:
-
Parameter 43-00 Component Temp.
-
Parameter 43-01 Auxiliary Temp.
Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
Name
STO
SS1-a
SS1-b
SLS-a
SLS-b
SO Mon
None
Parameter type: Range, 0 - 25
Data type: VisibleString
Parameter type: Range, 0.00 - 99.99
Data type: Uint16
N O T I C E
Parameter Descriptions
Setup: All setups
Change during operation: True
Description
Setup: All setups
Change during operation: True
Setup: 1 setup
Change during operation: True
AU275636650261en-000101 / 130R0334 | 677