Danfoss VLT AutomationDrive FC 301 Programming Manual page 660

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[190] Safe Function active
[191] Safe Opt. Reset req.
[192] RS Flipflop 0
[193] RS Flipflop 1
[194] RS Flipflop 2
[195] RS Flipflop 3
[196] RS Flipflop 4
[197] RS Flipflop 5
[198] RS Flipflop 6
[199] RS Flipflop 7
[221] IGBT-cooling
[222] Homing OK
[223] On target
[224] Position limit
[225] Position error
[226] Touch on target
[227] Touch activated
[231] In power lim. mot.
[232] In power lim. gen.
[233] In power limit
[234] PE power off
[246] Emcy mode was act.
[247] Emergency mode
[249] Emcy m. OPR unexpected
[250] Emcy mode limits
[254] Testing emcy mode
Parameter 36-62 Terminal X49/11 Min. Scale
Table 1344: Parameter 36-62 Terminal X49/11 Min. Scale
36-62 Terminal X49/11 Min. Scale
Default value: 0%
Conversion index: 0
660 | Danfoss A/S © 2022.12
Parameter type: Range, 0 - 200%
Data type: Int16
Parameter Descriptions
Description
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334