Danfoss VLT AutomationDrive FC 301 Programming Manual page 60

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 0-72 Time Format
Table 45: Parameter 0-72 Time Format
0-72 Time Format
Default value: [0] 24 h
Conversion index: –
Option
[0]*
[1]
Parameter 0-73 Time Zone Offset
Table 46: Parameter 0-73 Time Zone Offset
0-73 Time Zone Offset
Default value: 0 min
Conversion index: 70
Enter the time zone offset relative to UTC. This parameter is required for the automatic daylight saving time adjustment.
Parameter 0-74 DST/Summertime
Table 47: Parameter 0-74 DST/Summertime
0-74 DST/Summertime
Default value: [0] Off
Conversion index: –
Select how to handle daylight saving time/summer time. For manual setting of DST/summer time, enter the start date and end date
in parameter 0-76 DST/Summertime Start and parameter 0-77 DST/Summertime End.
Option
[0]*
[2]
Parameter 0-76 DST/Summertime Start
Table 48: Parameter 0-76 DST/Summertime Start
0-76 DST/Summertime Start
Default value: Size related
Conversion index: 0
Sets the date and time when DST/ summer time starts. The date is programmed in the format selected in parameter 0-71 Date For-
mat.
60 | Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
Name
24 h
12 h
Parameter type: Range, -780 - 780 min
Data type: Int16
Parameter type: Option
Data type: Uint8
Name
Off
Manual
Parameter type: Range, 0 - 0
Data type: TimeOfDay
Setup: 1 setup
Change during operation: True
Description
Setup: 2 setups
Change during operation: False
Setup: 1 setup
Change during operation: True
Description
Setup: 1 setup
Change during operation: True
AU275636650261en-000101 / 130R0334
Parameter Descriptions