Danfoss VLT AutomationDrive FC 301 Programming Manual page 429

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[126] Activate touch
[127] Deactivate touch
[128] Target inverse
[129] Target
[130] Act. speed mode
[131] Deact. speed mode
Parameter 13-55 SL Controller 3 Event
Table 690: Parameter 13-55 SL Controller 3 Event
13-55 SL Controller 3 Event
Default value: Size related
Conversion index: -
Danfoss A/S © 2022.12
Description
Selects the absolute position mode instead of the relative position mode.
This option is available only with software version 48.20 and newer.
Activates the touch probe positioning mode.
This option is available only with software version 48.20 and newer.
Deactivates the touch probe positioning mode.
This option is available only with software version 48.20 and newer.
Changes the sign of the active target position value.
This option is available only with software version 48.20 and newer.
The active target position is not changed.
This option is available only with software version 48.20 and newer.
Activates the speed mode when option [9] Positioning or option [10] Synchronization is selected
in parameter 1-00 Configuration Mode.
This option is available only with software version 48.20 and newer.
Deactivates the speed mode and activates the option selected in parameter 1-00 Configuration
Mode.
Parameter type: Option, Array [20]
Data type: Uint8
N O T I C E
N O T I C E
N O T I C E
N O T I C E
N O T I C E
N O T I C E
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 429
Parameter Descriptions