Danfoss VLT AutomationDrive FC 301 Programming Manual page 411

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL time-out 3
[71] SL time-out 4
[72] SL time-out 5
[73] SL time-out 6
[74] SL time-out 7
[75] Start command given
[76] Digital input X30/2
[77] Digital input X30/3
[78] Digital input X30/4
[79] Digital input X46/1
[80] Digital input X46/3
[81] Digital input X46/5
[82] Digital input X46/7
[83] Digital input X46/9
[84] Digital input X46/11
[85] Digital input X46/13
[90] ATEX ETR cur. warning
[91] ATEX ETR cur. alarm
[92] ATEX ETR freq. warning
[93] ATEX ETR freq. alarm
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
Danfoss A/S © 2022.12
Description
[▹] is pressed. Only available on the graphical LCP.
[▵] is pressed. Only available on the graphical LCP.
[▿] is pressed. Only available on the graphical LCP.
Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 164, ATEX ETR cur.lim.alarm is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 166, ATEX ETR freq.lim.alarm is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 163, ATEX ETR cur.lim.warning is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If warning 165, ATEX ETR freq.lim.warning is active, the output is 1.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Parameter Descriptions
AU275636650261en-000101 / 130R0334 | 411