Danfoss VLT AutomationDrive FC 301 Programming Manual page 559

VLT AutomationDrive FC 301/302
Programming Guide
Array with 20 elements shown below the parameter number in the display. Press [OK] and step between elements with [◃], [▹], [▵],
and [▿]. Select the item to be associated with the preventive maintenance event.
Option
[1]*
[11]
[12]
[13]
[14]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
Parameter 23-11 Maintenance Action
Table 1029: Parameter 23-11 Maintenance Action
23-11 Maintenance Action
Default value: [1] Lubricate
Conversion index: -
Select the action to be associated with the preventive maintenance event.
Option
[1]*
[2]
[3]
[4]
[5]
[6]
[7]
[20]
[21]
[22]
[23]
Danfoss A/S © 2022.12
Name
Motor bearings
Drive cooling fan
System health check
Warranty
Mech brake
Maintenance text 0
Maintenance text 1
Maintenance text 2
Maintenance text 3
Maintenance text 4
Maintenance text 5
Service log full
Parameter type: Option, Array [6]
Data type: Uint8
Name
Lubricate
Clean
Replace
Inspect/check
Overhaul
Renew
Check
Maintenance text 0
Maintenance text 1
Maintenance text 2
Maintenance text 3
Parameter Descriptions
Description
Setup: 1 setup
Change during operation: True
Description
AU275636650261en-000101 / 130R0334 | 559